VarTech Systems VT084C Betriebsanweisung PDF herunterladen (Seite 13)

13

VT084DiamondVue/CrystalVueUser’sGuide150‐175

MOUNTING INSTRUCTIONS

SECTION 7



7.1 Panel Mount Procedure

MechanicalDrawings      

Model  Description     Page(s)

VT084P2 8.4" DiamondVue/CrystalVue Panel Mount Drawing (Nema 4) 16

VT084PS2 8.4" DiamondVue/CrystalVue Panel Mount Drawing (Nema 4x) 17

VT084C2 8.4” DiamondVue/CrystalVue Open Frame 18

VT084W2 8.4” DiamondVue/CrystalVue Wall/Vesa Mount 19

1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches.

2. If access to the side of the monitor is not available following installation, attach the power and video cables to the

side of the monitor at this time.

3. Install the monitor in the prepared cutout.

4. Install the lock nuts and washers, supplied with the monitor, behind the holes running along the sides and top/bottom

of the cutout in the panel. Extra lock nuts and washers are provided.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

VarTech Systems VT084C Betriebsanweisung Seite 13